© 2017 AMETEK Electronic Systems Protection / Technical Support: 1-800-645-9721 / espsurgex.com 10
3.
Installation
The UPS and external battery pack are designed to be rack-mounted in four post frames or to be floor standing in
a tower configuration.
3.1 Tower Installation
ATTENTION:
Use all supplied mounting hardware on each UPS and extended battery pack.
A.
To install standalone, refer to the figure directly below:
Assemble two feet as one tower stand.
Align the two stands.
Put the UPS module in the stands.
B.
To install a UPS module and one extended battery pack, refer to the figure directly below :
Assemble two feet each with an extension as one tower stand.
Align the two stands.
Put the UPS module and external battery pack in the stands.
NOTE:
When installing the UPS or external battery pack with feet, please keep both feet a distance of 2.75in
(70mm) from the edge of the unit. See figure below:
