© 2017 AMETEK Electronic Systems Protection / Technical Support: 1-800-645-9721 / espsurgex.com 12
Step 2.
Use four M6 screws to mount the right and left rail sliders to the two back posts of the four-post rack.
Refer to the figure directly below:
Step 3.
Insert one M6 nut into the right and left front posts of the four-post rack for a 2U installation.
Refer to figure directly below:
Step 4.
Install UPS alone.
Add mounting ears to both sides of the unit and refer to figure directly below:
Step 5.
Install UPS and external battery pack.
Refer to figure directly below:
