Ametek SURAGEX AXESS Reasy FLATPAK SA-82-AR, Hardware Installation Manual

Page: 23 / 26

© AMETEK Electronic Systems Protection, Inc. | Technical Support: 800-645-9721 | surgex.com 22
SA-82-AR User Manual
________________________________________________________________________________________________
eCmnd_io
typedef enum{ eIO_null,
eIO_changeRelay,
eIO_changeRelays,
eIO_getRelay,
eIO_getRelays,
eIO_getInput,
eIO_getInputs,
eIO_pulseRelay,
} eIO;
Command Description Server Response
eIO_changeRelay This command is used to change the status of an individual relay.
It carries the TChangeRelay payload; see the Payloads
subsection for details.
0 → Successful
1 → Error
eIO_changeRelays This command is used to set all of the relays in a device. It carries the
TChangeRelays payload; see the Payloads subsection for details. 0 → Successful
1 → Error
eIO_getRelay This command has not yet been implemented.
eIO_getRelays This command is used to get the status of all the relays on the
server. Byte Array
containing status of
each relay.
eIO_getInput This command has not yet been implemented.
eIO_getInputs This command is used to get the status of all inputs on the server. Byte Array
containing status of
each input.
eIO_pulseRelay This command is used to pulse a relay. It carries the
TPulseRelay payload; see the Payloads subsection for details.
0 → Successful
1 → Error
eCmnd_keepAlive
typedef enum{
eKeepAlive_null;
} eKeepAlive;
Command Description Server Response
eKeepAlive_null This is the only valid descriptor that the keep alive command
supports. It is defined as null, as it carries no payload. 0 → Successful
1 → Error