Asterion DC Multioutput Series
Programming Manual
M330517-01 Rev C
5-19
5.2.2
Communication test using serial interface program
1. Use one of the available programs for serial communication, such as Tera Term.
2. If you choose to use Tera Term:
•
Select serial option in the Tera Term window and select the port identified in
the device manager and press OK. (Refer to Figure 5-3)
Figure 5-3: Port identification in Tera Term
•
Select setup and select serial port in the setup window.
•
Set the baud rate to 115200, 8 data bits, no parity, 1 stop bit, and none flow
control. (Refer to Figure 5-4)
Figure 5-4: Baud rate selection in Tera Term
Summary of Contents for Sorensen Asterion DC ASM
Page 1: ...M330517 01 Rev C Asterion DC Multioutput Series Programming Manual...
Page 6: ...Asterion DC Multioutput Series Programming Manual M330517 01 Rev C v SAFETY SYMBOLS...
Page 145: ...Asterion DC Multioutput Series Programming Manual 13 128 M330517 01 Rev C CAL n LOCK...
Page 162: ...M330461 01 Rev C 14 145...
