Ametek Ortec radEAGLET-R 2SG, User Manual

Page: 70 / 163

5.13 GPS radEAGLET-R User Manual
5.13 GPS
This item is available for radEAGLET-R models equipped with a GPS receiver (see E.1 ,
p. 153 ).
This screen (Fig. 63 , p. 70 ) has the switch for the GPS receiver and shows your location, if
available.
The current GPS status is indicated by a symbol in the status area (see 2.1 , p. 23 )
GPS Status
Figure 63: The GPS settings when GPS is off
When you switch on the GPS receiver, it starts to determine the location. For that it needs
to receive data from a sufficient number off NAVSTAR satellites. The current number is
shown, see Fig.
64 , p. 71 , and increases after some time, see Fig. 65 , p. 71 .
If the GPS receiver has sufficient data from enough satellites (“has a fix”), your location ist
shown, see Fig.
66 , p. 72 .
Settings and Commands
Change
Edit the highlighted setting.
Exit
Return to the superior screen.
70/163 Software 3.2.12r • Document 3.3.3b4o © innoRIID GmbH • 2020-11-18