1
1. APPLICATION INFORMATION
The tester is used for determining the Brinell hardness of un-quenched steel, cast-iron,
nonferrous metals and soft bearing alloys. This tester can be used in metallurgical
plants, machine manufacturing plants, metal working plants , industrial laboratories,
and laboratory environments.
The measuring range of hardness is 8-450 HBS when steel ball indenter is used, and
8-650 HBW when a tungsten carbide ball indenter is used.
2. GENERAL INFORMATION
2.1 Technical Data
Loads available (kg) 62.5, 187.5, 250, 500, 750, 1000, 1500, 3000
Selectable Time-at-Load
12, 30, 60 sec.
Diameter of ball
10 mm.
Duration of loading
12, 30, 60 sec.
Max. height of test -piece
9"
Depth of throat
4.5"
Power supply
110 V., 60Hz
Dimensions (L x W x H)
9"W x 34"H x 28"D
Net weight
440 lbs.
Air requirements
60 psi, 0.4 cfm.
2.2 Items Shipped with Unit
Set of weights
Weight Hanger
Large Flat Anvil (installed on elevating screw)
Accessory Kit and Ship Kit Contents (see below)
2.3 Accessory/Ship Kit Contents
Flat
Anvil
Operating
Instructions
Vee
Anvil
Hold-down
hardware
Power Cord
Set of Leveling Feet
Set of wrenches
[2] spare fuses
Brinell Test Block, HB30
10mm ball indenter with carbide ball and cert.
Brinell Chart
Certificate of calibration for tester
2.4 Options
Foot pedal switch
2.5 and 5 mm indenters
20 X Brinell Scope with multiple adjustment