Ametek LAND R1500T User Manual Download Page 27

PRODUCT  WARRANTY

Thank  you  for  purchasing  your  new  product  from  Land  Instruments  International.    This  Land 

manufacturer’s  ‘back-to-base’  warranty  covers  product  malfunctions  arising  from  defects  in  design 

or manufacture.  The warranty period commences on the instrument despatch date from the Land 

Instruments International Ltd. factory in Dronfield, UK.

36 MONTHS WARRANTY

Building upon the reputation for reliability and longevity that System 4 and UNO thermometers 

have earned, Land are delighted to be able to provide our customers with an industry-leading 

36 month warranty for the following products:-
•  System 4 thermometers, processors, accessories and mountings and special instruments 

based on System 4.

•  UNO thermometers, accessories and mountings and special instruments based on UNO.
•  Application-dedicated processors based on LANDMARK

®

 Graphic.

•  ABTS/S and ABTS/U.
•  FTS.
•  VDT/S and VDT/U.
•  DTT.
•  FLT5/A.

This 36 month warranty is provided as standard for all orders for the products listed above received from 

1st May 2002.
We believe that our customers expect us to set the standard in terms of performance, quality, reliability and 

value for money.  This 36 months warranty, as a part of an on-going program of continuous improvement, 

is just one way in which Land strive to maintain our position as the temperature measurement partner of 

choice.

24 MONTHS WARRANTY

The following Land Instruments International products are provided with a 24 months warranty:

•  ARC.

•  FTI-E.

12 MONTHS WARRANTY

All Land Instruments International products not provided with either a 36 month or 24 month warranty (see 

lists above), are provided with a 12 months warranty.

Summary of Contents for LAND R1500T





























Reviews: