5 - 1
Cyclops L
Portable Thermometers
User Guide
5.1 ON/OFF Switch
The
On/Off
switch is on the left-hand side of the
thermometer (see Fig. 3-1, item 6). The switch has
two push buttons,
Off
(a) and
On
(b).
A single press of a switch will activate/de-activate
the unit.
Note:
if the Cyclops fails to turn on, it can be
reset by pressing the
On
and
Off
Switches
simultaneously. This will, however, reset the
internal clock
5.2 Trigger Operation
The
Trigger
(c) is on the thermometer handle (see
Fig. 3-1, item 7). The trigger function depends
upon the chosen mode of operation:
Classic
,
Burst
,
Latched
or
Route
(see Section 8).
5.3 LCD Display Panel & Keypad
The LCD display panel (d) is on the left-hand side
of the thermometer body (see Fig. 3-1, item 1). It
operates in three modes:
Measure Mode
,
Route
Mode
and
Menu Mode
.
In
Measure Mode
, the scene temperature and
thermometer setup information is displayed.
In
Route Mode
, scene temperature can be
measured and stored against pre-loaded location
IDs. See Section 7.5.
In
Menu Mode
, the function menus of the
thermometer can be accessed. See Section 7.
There are three action keys on the
Keypad
to the left of the main display:
(Scroll Up),
(Scroll Down) and
(Enter/select). These are used to navigate
around the various menus and displays.
THERMOMETER
CONTROLS
5
Fig. 5-1
b
a
Fig. 5-2
C
Fig. 5-3
d
