Ametek Land SPOT ACTUATOR, User Manual

Page: 37 / 38

6 - 1
Fixed Spot Thermometers
User Guide
SPOT Actuator
Analogue, Ethernet and Optional Remote:
Trigger a scan by any method.
Also, can be set to scan if SPOT temperature
falls below a customer selected value
Weight: 3 kg (without instrument and housings)
Dimensions: Actuator: 11.5 x 13.0 x 15.5 cm (4.5 x 5.1 x
6.1 in) (without instrument and housings)
Remote: 14.0 x 6.5 x 3.0 cm (5.5 x 2.6 x
1.2 in) (without cables)
Vibration: 3 G, all axes
Warranty: 18 months
Accessories: Range of accessories available including Water
Cooled Mounting and Light Purge
6.1 Water Cooled Mounting Plate Specification
Accessories: Range of accessories available including Water
Cooled Mounting and Light Purge
Dimensions (LxWxH) 169 x 119 x 29 mm / 6.7 x 4.7 x 1.1 in
Water Connecting Tubes Ø 9.5 mm / Ø 0.37 in
Weight 1.2 kg / 2.6 lbs.
Material Aluminium / Steel (?)
Water Quality Clean cooling water
Water pH level must be within 5-8 pH
Max. Water Pressure 3 bar / 43,5 psi
Max. Water inlet Temperature <40 °C if ambient air <80 °C
(<104 °F / <176 °F)
<20 °C if ambient up to 100 °C
(<68 °F / <212 °F)
Recommended Flow Rate 1 l/min / 0.2 gal/min