Page 12
For technical questions, please call 1-888-866-5797.
Item 64019
S
AFETY
Op
ERA
TION
M
AINTENANCE
S
ETU
p
Continuity Measurement
Test continuity between two
points of a circuit.
WARNING!
To prevent electric shock, turn
off all power and fully discharge capacitors
on the circuit under test before measuring.
1. Plug black test lead into
COM
Jack.
Plug red test lead into
Input
Jack.
2. Turn the Rotary Switch
to the
position.
3. Press
FUNC
until is displayed.
4. Connect the test leads across
the circuit to be measured.
5. Read measured resistance on the
Display. If the measured resistance
is less than 50Ω, Meter will beep.
6. When testing is complete, turn
Rotary Switch to
OFF
, remove
Test Leads and store with Meter.
Note:
If Test Leads are open or
the resistance of the circuit is out
of range,
OL
is displayed.
Diode Measurement
Test voltage drop in diodes.
WARNING!
To prevent electric shock, turn
off all power and fully discharge capacitors
on the circuit under test before measuring.
1. Plug black test lead into
COM
Jack.
Plug red test lead into
Input
Jack.
2. Turn the Rotary Switch
to the
position.
3. Press
FUNC
until
is displayed.
4. Connect red probe to diode’s anode
and black probe to its cathode.
5. Read measured forward-biased
voltage drop on the Display.
Note:
If the test leads are reversed
or open,
OL
is displayed.
6. When testing is complete, turn
Rotary Switch to
OFF
, remove
Test Leads and store with Meter.
