Page 7
For technical questions, please call 1-888-866-5797.
Item 64170
Installing/Replacing Batteries
CAUTION! Do not mix old and
new batteries. Do not mix alkaline,
standard (carbon-zinc), or rechargeable
(nickel-cadmium) batteries. Position
batteries in proper polarity. Do not
use swollen or leaking batteries.
The battery compartment is located
on the bottom of the handle.
1. Slide the Battery Cover off, remove the
battery case, then insert batteries.
2. Slide the battery case back in and
replace the Battery Cover.
Tool Set Up
TO PREVENT SERIOUS INJURY FROM ELECTRICAL SHOCK:
Make sure that the Camera is OFF before performing any procedure in this section.
1.
Connecting Cable:
a. Carefully push Cable’s key
into Cable Connector’s slot.
b. Turn Cable Connector
counterclockwise
until the
Cable and Cable Connector
are securely attached.
2.
Disconnecting Cable:
a. Turn Cable Connector
clockwise
until the Cable and Cable
Connector are detached
.
b. Remove Cable.
Cable
Key
Slot
Cable
Connector
3.
Micro SD Card
a. Insert the Micro SD Card into the
Memory Card Slot, then push down
on the card until it clicks into place.
Note:
When the card is installed, the
SD
icon will appear on the Display Screen.
b. To remove card, push down on the
card until it pops up, then remove.
4.
Attaching Accessories:
a. Hold the accessory against
the Imager Head, placing
the Hook in the hole.
b. Match the slot on the Sleeve
to the accessory, then slide the
Sleeve down the Imager Head
until it covers the Hook.
Imager
Head
Accessory
Sleeve
Hook
5.
Connecting to Computer with
USB to Mini-B Cable:
Plug the Mini-B end into the Mini-B Port,
then plug the USB end into a computer.
6.
Connecting to External
Monitor with RCA Cable:
Plug one end into the RCA Video
Out Port, then plug other end into
RCA Video In Port on monitor.
