Page 8
For technical questions, please call 1-888-866-5797.
Item 64013
S
AFET
y
Op
ERA
TION
M
AINTENAN
c
E
S
ETU
p
Operating Instructions
Read the ENTIRE IMpORTANT SAFETy INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
Electrical shock can cause death or injury! NEVER TOUcH
exposed conductors of electricity
.
General Operating Instructions
Data Hold
The data hold function will keep
the current reading on the Display.
To activate data hold:
1. Press the
button and the
reading will be held on the Display.
The symbol appears.
2. Press
again to release the hold.
Manual Range
The Meter’s default range is
AUTO
. To select manual range, press
RAN
. Each press
of the button increases the range. Hold the
RAN
button to return to auto-range.
Note:
Manual range cannot be used in
40A~
and
4A~
current modes,
frequency, duty cycle, diode, continuity, or temperature modes.
Backlight and Worklight
1. Press the
button for two or more
seconds to turn on the backlight.
2. Press the
button for two or more
seconds again to turn the backlight off.
3. While in current range modes,
turning the backlight on also
turns the Clamp Worklight on.
Note:
Frequent use of the backlight will
shorten the life of the batteries. Only
use the backlight when necessary.
