Page 10
For technical questions, please call 1-888-866-5797.
Item 63980
S
AFET
y
Op
ERA
TION
M
AINTENAN
c
E
S
ETU
p
Measurement Operation
Temperature Measurement
Measure temperature from 32
°F
to 1832
°
F (0
°C
to 1000
°
C).
1. Connect Thermocouple(s)
(included) to T1 and/or T2 Input,
following indicated polarity.
2. Press Power Button to turn
Thermometer on.
3. Set thermocouple type to be consistent
with attached Thermocouple(s).
Note:
If Thermocouple is not connected
to selected Input, Thermocouple
is open, or temperature exceeds
measuring range,
OL
is displayed.
4. Press Unit Selection Button to slect
appropriate termperature units.
5. Touch the tip of the Thermocouple
to the object to be tested.
6. Read measured temperature on
Display. By default, T1 measurement
is shown on main display and T2
is shown on auxiliary display.
7. Press
T1/T2/T1-T2
to switch position of
T1 and T2 measurements on Display.
8. Press
T1/T2/T1-T2
again to
display difference between T1
and T2 measurements.
Data Hold
1. Press
HOLD
button to hold reading
on Display. The
symbol appears.
2. Press
HOLD
again to release the hold.
Maximum, Average, and Minimum Value Measurements
1. Press
MAX AVG MIN
one time to
view maximum measurement.
2. Press
MAX AVG MIN
two times to
view minimum measurement.
3. Press
MAX AVG MIN
three times
to view average measurement.
4. Read maximum, minimum, or
average measurement on Display.
5. Hold
MAX AVG MIN
to
return to normal mode.
