Page 5
For technical questions, please call 1-888-866-5797.
Item 58111
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
General Operation
1. Install batteries according to
Battery Replacement on page 7.
2. Open USB/Memory Card slot and
insert included mini SD card.
3. Press and hold Power Button
until display is on.
Note:
Camera does not automatically shut off.
See Photos: on page 5
to change setting.
4. Press Up and Down buttons to increase or
decrease thermal image color saturation.
5. Press OK to enter Settings.
6. When finished, press and hold
Power Button until display is off.
Take Measurement
1. Turn camera on.
2. Hold camera approximately 12" from target.
3. View temperature values.
See Functions on page 4.
4. Press Trigger to capture image.
5. View image according to
Photos: on page 5.
6. Use included USB cable to
view/transfer photos via another device.
Settings
Use Up and Down buttons to select setting. Press OK to enter
setting. Press Go Back to return to previous screen.
SD Card
Photos:
• Press OK to view
list of photos.
• Use Up and Down buttons
to view photos. Press
OK to select photo.
• Once photo is selected, use Up and Down
buttons to navigate through photos.
Format Photos:
• Press OK to format memory card.
•
Note:
Once OK is pressed,
there is no option to cancel.
Color
• Press OK to select on of
three thermal color palettes.
• Press Go Back to
set palette.
SAFETY
OPERA
TION
MAINTENANCE
SETUP
