2. Assembling Continuous Rows-
1:
Splice 12" BX (Supplied by Amerlux) into
beginning fixture via K.O. on access plate
2:
Remove access plate from mating fixture.
3:
Remove wire nute from mating fixture.
4:
Splice in BX to mating fixture according to
code.
5:
Secure access plate to mating fixture.
Alignment Spline
Alignment Pin
1: Slide housings together. Slide alignment splines and Pins into cavities in extrusion. Slots on braces should align.
2: Secure fixtures together with 10-24 Hex Head Screws & 10-24 Keps Nuts (By Amerlux)
3: Tighten Screws on Alignment Spline
10-24 Hex Screw
2.Feeding Continuous Rows-
2
1
3
4
5
3.Installing Perforated Panels
1:
Tip/Tilt appropriate Perforated Panel into
fixture with clips open (As Seen Here)
2:
Swivel tabs into slot in extrusion to lock.
(As Seen Here)
LIGHTING SOLUTIONS
AMERLUX
ADAPT. ABILITY.
R
TM
INSTALLATION INSTRUCTIONS
SHEET #:
Amerlux, LLC. - 178 Bauer Drive, Oakland NJ 07436 - T: 973-882-5010 - F: 973-882-2605
www.amerlux.com
689-0353 Sheet 2 of 5