9
step
and/or serious injury.
Failure to do so could cause instability, product collapse,
All nails must be driven into the parts straight and centered.
Please make sure that the Back Panel is attached securely.
WARNING
IMPORTANT!
THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
(6)
x20
nail
Attach the back panel so that the bottom
edge is even with the bottom (D) and
aligned side to side.
Assure that the unit is square.
Distance from corner to corner must be
equal as shown.
Unfinished
Side
6
16
D
Turn the unit onto its front
back
panel
Summary of Contents for 249-05-0482
