30
MEMORY DIALING
Storing Memory (Speed) Dial
Numbers
To program a speed dial location, do
the following:
•
With the Handset OFF, enter the
telephone number you wish to
store (20 digits maximum).
•
Enter program mode by pressing
and holding MEM/PRG . The
display will show the following:
•
Enter the memory location (00..20)
you wish to store the number in.
After the second memory location
digit is entered, the unit will emit a
warbled tone (a short series of
beeps) to confirm successful
programming and exit program
mode.
If programming is unsuccessful the
unit will display:
Unsuccessful programming can result
from not correctly completing the
programming sequence. If this
message appears, simply repeat the
programming sequence.
•
The number stored in memory
location 00 can be accessed by
pressing the one touch speed dial
QUICK DIAL key on the Base Unit.
Dialing From Memory
From the Handset
•
Press PHONE to get a dial tone.
•
Press MEM/PRG , you're
prompted to enter a speed dial
location number:
•
Enter a 2 digit location number
(00..20).
•
The number stored in that location
will be displayed and immediately
dialed.
Or
•
Beginning from the OFF mode,
press MEM/PRG followed by a
2 digit location number (00..20).
PHONE
OFF
1
2
3
4
5
6
7
8
9
0
#
ABC
DEF
GHI
JKL
MNO
PGRS
TUV
FLASH
MEM/PRG
CLR/DEL
REDIAL
HOLD/PAUSE
INTERCOM
MUTE
‘69 AUTO
CALLBACK
REPEAT
DIALING
BILLED SERVICES
STORING SPEED DIAL
NUMBERS
DIAL A PHONE
NUMBER
PRESS and HOLD
PRESS LOCATION
(00..20)
MEM/PRG
AM 1930
9/5/99, 12:14 AM
30
