background image

CHAPTER 9
FCC INFORMATION

Your local telephone company is required
by the FCC to allow you to connect FCC
registered telephone equipment to their
telephone lines.  

They may ask you to provide them the
Federal Communications Commission
(FCC) registration number and the Ringer
Equivalence Number (REN) of the 

DIALOGUE

RC

printed on the label on

the bottom of the unit.

DIALOGUE

RC

uses a FCC Part 15

approved transmitter and receiver.  Its
operation is subject to the following two
conditions:

1. This device may not cause harmful 

interference.

2. This device must accept any interfer-

ence that may be received, including 
interference that may cause undesired
operation.

14

CHAPTER 8
MAINTENANCE

To ensure trouble–free service, your 

DIALOGUE

RC

should always be treated

with care. Do not drop or subject the
phone to high impact. The unit can be
cleaned with a damp cloth and a mild
detergent. Never use abrasives or
solvents.

Keep the unit plugged into the electrical
outlet at all times, except when cleaning.
This will automatically recharge the
optional back–up batteries, and keep the
phone operational for incoming calls. We
recommend using a surge protector to
prevent damage to the 

DIALOGUE

RC

in case of power surges or electrical
storms.

Summary of Contents for Dialogue RC-100




















Reviews: