1. Identify and locate all hardware components listed below.
2. Attach each Table Leg (D) to Table Top
Frame (C) using 8 pieces medium screws ( I ).
3. Attach 1 piece X-‐support
(B) using 4 pieces small screws ( E ).
5. When all pieces are attached, tighten
each screw securely.
I
I
4. Attach X-‐support (B) using 1 piece screw
( F ), washer (L) and nut (K).
E
B
NOTE:
Part E : M6 x 1.0 15mm thread length (Round head w/ flat back)
Part I : M6 x 1.0 15mm thread length
Part K : M6 x 1.0 25mm thread length
HARDWARE
I
E
I
