ASSEMBLY INSTRUCTION
1
. Use a hex wrench to attach the Table Plate
and Leg to the underside of the Tabletop with
the provided hex bolts. Attach the Foot Rest.
2A
. A Black Cap protects the hydraulic
mechanism on the Support Cylinder.
2B
Remove the Black Cap and discard it
before assembly. The Orange hydraulic
button will become visible.
3.
Insert the Support Cylinder into the Table
Plate and Leg and press firmly.
4
. Set the Foot Cap over the hole in the
Base. Insert the thicker end of the Support
Cylinder into the center hole of the Base,
and press down FIRMLY.
5
. Guide the open end of the Tabletop assembly
over the Support Cylinder and firmly press down
on the tabletop.
To raise the tabletop, grasp the Handle and pull upward without applying any
weight. To lower, raise the handle upward and apply weight to the tabletop.
DISASSEMBLY INSTRUCTIONS
Turn the table upside down. Hit the Metal Clip
several times located in the exact center of the
bottom of the Base with a rubber mallet to
disengage the locking mechanism. The Base will
separate from the Table Top and Support Cylinder.
To remove the Table Top from the Support Cylinder, turn the table
upside down, and strike the edge of the Support Cylinder several times
where it meets the support leg of the tabletop. The Support Cylinder and
Table Plate and Leg will separate with applied force.
1
4
5
1
2A
2B
Metal Clip
3
3
