ASSEMBLY INSTRUCTIONS
1)
Locate Support (C) and attach one Table Leg (B).
2)
Attach the second Table Leg (B) using one
Attach one Hex Bolt at top and two Hex Bolt at
Hex Bolt at top and two at bottom.
bottom using the Wrench.
3)
Attach the third Table Leg using one Hex Bolt
4)
Place two Washers on top of crank.
at top and two at bottom.
5)
Attach the Table Top (A) by rotating the top.
6)
Tighten Crank Lock Bolt (which is attached).
201706
201706
