A Black Cap protects the
hydraulic mechanism on
the Support Cylinder.
Remove the Black Cap and
discard it before assembly.
The Orange hydraulic
button will become visible.
Press the Seat onto
the narrow end of
Support Cylinder.
Place the wide end of
the Support Cylinder
into the center hole.
Press the Support
Cylinder down firmly
into the center hole.
and press down
FIRMLY.
ASSEMBLY INSTRUCTION
201604
To raise and lower the Seat, grasp the Handle and pull upward without applying any weight on the
Seat. To lower, grasp the Handle and pull upward while sitting on the Seat.
To disassemble, turn the stool upside down,
and hit the clip on the center of the bottom of
the base with a rubber mallet to disengage the
locking mechanism. Then, turn the stool right
side up, and lift the Seat upward, pulling the
Seat Assembly off of the Support Cylinder.
Use an allen wrench to
attach the Seat Plate to the
underside of the Seat with
the provided bolts.
Metal Clip
