ASSEMBLY INSTRUCTION
1
. Use a hex wrench to attach the Support
Cylinder (C) to the underside of the Seat (F)
with the provided hex bolts.
2.
Locate Black Cap on Support Cylinder.
3A
. The Black Cap protects the hydraulic
mechanism on the Support Cylinder (B).
3B
Remove the Black Cap and discard it
before assembly. The Orange hydraulic
button will become visible.
4.
Insert the Support Cylinder (B) into the
Support Cylinder (C) and press firmly.
5
Set the Foot Cap (G) over the hole in the
Base. Insert the thicker end of the Support
Cylinder into the center hole of the Base,
and press down FIRMLY.
To raise the seat, grasp the Handle and pull
upward without applying any weight. To lower,
raise the handle upward and apply weight to the
seat.
DISASSEMBLY INSTRUCTIONS
Turn the stool upside down. Hit the Metal Clip
several times located in the exact center of the
bottom of the Base with a rubber mallet to
disengage the locking mechanism. The Base will
separate from the Seat Top and Support Cylinder.
To remove the Seat Top from the Support Cylinder, turn the stool upside
down, and strike the edge of the Support Cylinder several times where it
meets the support. The Support Cylinder and Base Plate and Leg will
separate with applied force.
1
5
3A
3B
Metal Clip
3
4
201507
1
Assembled
Bar Stool
