A Black Cap protects the
hydraulic mechanism on
the Support Cylinder.
Remove the Black Cap and
discard it before assembly.
The Orange hydraulic
button will become visible.
Place the wide end of
the Support Cylinder
into the center hole.
Press the Support
Cylinder down firmly
into the center hole.
Press the Table Top
onto the narrow end
of Support Cylinder.
ASSEMBLY INSTRUCTION
To raise and lower the Table Top, press the lever under the table and pull
upward without applying any weight on the Table. To lower, press the Lever
and lean on the Table Top.
To disassemble, turn the stool upside down, and
hit the clip on the center of the bottom of the base
with a rubber mallet to disengage the locking
mechanism. Then, turn the stool right side up, and
lift the Seat upward, pulling the Seat Assembly off
of the Support Cylinder.
Place the Foot Cap over the
center hole on the base plate.
Metal Clip
