7
Power Lift Chair Operation
1. To recline your chair,
press the down button (S2) and hold until you reach
your desired position. Then release the button.
2. To return to a seated position from recline,
press the up button (S1)
and hold until the chair returns to a closed seated position. Then release the
button.
3. To lift your chair,
press the up button (S1) and
hold until you reach your desired height. Then
release the button.
4. To return to a seated position from lift,
press
the down button (S2) and hold until the chair
returns to the floor seated position. Then release
the button.
5. To lift your chair from a reclined position,
press the up button (S1) and hold, the chair will
keep going past the seated position and start to
lift, release the button when the chair reaches the desired
height.
6. To recline your chair from the lift position,
press the
down button (S2) and hold. The chair will keep going past
the seated position and start to recline. Release the button
when the chair reaches the desired reclined position.
7. Getting into your lift chair.
While standing next to your
chair, press the chair up button (S1) and raise the chair
to a height you can sit against. This height will vary from
person to person depending on the individual’s needs. Raise the chair high
enough so you do not have to flop down into the chair.
Flopping down into
the chair can cause personal injury and damage to the chair.
Press the
chair down button (S2). As the chair continues downward, adjust yourself into
a position that is comfortable to you. Continue pressing the button until chair
is in the seated position (chair firmly on the floor), then release the button.
8. Getting out of your chair,
press the chair up button (S1) and raise the chair
to a height that enables you to easily stand. Release the button. Return the
chair to the seated position (chair firmly on the floor) after getting out of the
chair so children, pets or obstructions do not get under the chair.
Note: Your Golden power lift chair can be stopped at any time during
lift or recline by releasing the selected button, offering you a wide range
of comfortable positions. Select the position that best suits your needs.
The motor is set to shut off when it reaches its fully extended or fully
retracted position if the selected button is not released. If you should go
past your desired position, select the button to bring you back to your
desired position. You can repeat the process as often as you like.
S1
S2
L.E.D.
light
