Step 20: Adjust the interlock
A.
Both gate posts must be anchored and level.
B.
Once posts are steady and straight, adjust the latch to enter the dead center of the interlocks latching
hole and tighten into place.
C.
Then, insert the latch inside the interlock until it locks.
*Note: there are 2 micro-switches inside the interlock they both must be released non-activated)
or the unit to run!
Scan to watch!
more videos can be found at
youtube.com/ameriglide
Exterior Door and Interlock
(2 minutes)
Scan to watch!
more videos can be found at
youtube.com/ameriglide
Surface Mounting an Interlock
(2 minutes)
Scan to watch!
more videos can be found at
youtube.com/ameriglide
Unlocking a Stuck Interlock
(1 minute)
20
