- 21 -
Hardware Installation Process
English
L ) CI
1
Signal
GND
M) CLR_CMOS (Clear CMOS)
?
You may clear the CMO S data to its default
values by this jumper.
?
This 2 pin connector allows y our system to
enable or disable the system alarm if the sys
tem case begin remove.
B ) BATTERY (Battery)
+
CAUTION
?
Danger of explosion if battery is incorrectly
replaced.
?
Replace only with the same or equivalent
type recommended by the manufacturer.
?
Dispose of used batteries according to the
manufacturer’s instructions.
1-2 close: Clear CMOS
1
2-3 close: Normal
1
Default doesn’t include the “ S hunter” to
prevent from improper use this jumper.
To clear CMOS, temporarily short 1-2 pin.