7
M965612 Rev. 1.8 (12/17)
C
FOR AC-VERSION
(MULTI HOOK-UP); Fig. 3, 3a, 3b
1. Remove COVERS from all CONTROL BOX (2).
2. Remove SOLID BLACK PLUG GROMMET (5) from
left side of all CONTROL BOX
(2), except from Unit
#1. Replace with GRAY GROMMET (9). (Supplied with
each Faucet).
3. Feed SENSOR CABLES (2) through the top of
CONTROL BOX
(3). Connect one SENSOR CABLE (2)
to the SOLENOID CABLE
(7), and the other to either
of the two terminals at the one end of the Y-ADAPTER
(11). Connect the 10’ EXTENSION (10a) to the other
terminal at the same end of the Y-ADAPTER
(11).
4. Feed the other end of the 10 ft. EXTENSION (10b)
through the two GRAY GROMMETS
(6a and 6b)
and connect to the single terminal end of the next
unit’s Y-ADAPTER
(11). Place Y-ADAPTER (11) into
CONTROL BOX
(3).
5. Repeat Steps above for each additional Unit, for a
Max. of 15 Units on one AC POWER SUPPLY (7).
6. Replace CONTROL BOX COVERS. Tighten cover
screws firmly.
Unit #1 Detail
Fig. 3a
2
11
10b
AC POWER SUPPLY
2
SENSOR
CABLES
7
3
2
5
10b
10a
12
6a
6b
Fig. 3b
CAUTION: Use only American Standard supplied
transformers and cable sets. Using non-AS supplied
cables, or cutting, splicing or modifying any components
will void the warranty.
Unit #2
Unit #3
Fig. 3
10 ft.
EXTENSION
CABLE
AC POWER
SUPPLY
*MAXIMUM OF 15 UNITS PER AC POWER SUPPLY.
10' MAXIMUM CABLE LENGTH BETWEEN UNITS.
OR
Unit #1
Already installed
BLACK &
WHITE
POWER
CONNECTIONS
