13 CONGLOMKB .COM
Please contact [email protected] or 1-855-629-3992 for further assistance.
Maintenance
REPLACING FILTERS
When filters need replacing, exchange with similar filters with
stainless steel clips. Also replace filters that are damaged with
punctures, bends, or broken frames .
- Turn off the range hood and disconnect the power .
- Replace with an equivalent filter, then reconnect the power.
REPLACING LIGHT BULBS
When light bulbs burn out, replace them with a 25W or max . 35W /
JDR 16, GU10 twist and lock base light bulb.
- Turn off the range hood, disconnect it from its power
source, and ensure that the lights are cool .
- Use the light suction cup (C) to turn the bulb (1)
counter-clockwise and pull it out to remove it.
- Push in the new bulb (2) and turn it clockwise . Do not
release the bulb until you are sure the bulb has been
securely installed . Then reconnect the power .
- If new bulbs do not operate, ensure they are inserted
correctly .
DANGER:
Turn off the power circuit breaker or the power
switch on the junction box before performing maintenance .
Touching circuitry inside the range hood while it is energized
will result in death or serious injury .
WARNING:
Failure to replace worn out or damaged filters
will increase the risk of fire.
WARNING:
Light bulbs can become extremely hot when
turned on . Do not touch bulbs until they are switched off and
cooled . Touching hot bulbs could cause serious burns .
1
2
C
