M 9 6 8 5 7 6
R E D
S T R I P E
B L U E
S T R I P E
2
MAKE WATER SUPPLY CONNECTIONS
Turn off hot and cold water supplies before beginning.
Connect FLEXIBLE SUPPLIES
(1, 2)
directly to wall supplies. Connection
on fitting supplies are 3/8" compression. Connect left supply
(Marked with a Red Stripe) to Hot and right supply (Marked with
Blue Stripe) to Cold wall supply. Use adjustable wrench to
tighten connections. Do not over tighten.
Faucet supplies are 27-1/2" long from faucet base.
Note: If additional supply length
is required, installer must
purchase additional parts
separately.
Important: If SUPPLY HOSES
(1, 2) are too long, loop as
illustrated to avoid kinking.
1
2
COLD
HOT
33
TEST INSTALLED FAUCET
Unthread AERATOR
(2)
from SPOUT
(3)
.
Turn on water supplies and check connections for leaks
.
Operate HANDLE
(1)
on and off, hot and cold to flush water
lines thoroughly. Replace AERATOR
(2).
Check all drain connections for leaks.
Move HANDLE
(1)
to "off" position.
1
2
3
HOT & COLD SUPPLIES
Move HANDLE
(1)
into "off" position.
