© 2003 American Standard Inc.
KS-54
LAKELAND™ 31”
LARGE SINGLE BOWL SINK
AMERICAST®
7173.001/803/4/5Self-Rimming
7173.001/803/4/5 Undercounter Mount
FINISHED WALL OR SPLASHBACK
FINISHED FLOOR
914mm
(36)
TO FINISHED
FLOOR (OPTIONAL)
●
*
3/8 O.D. BENDABLE TUBING
COUNTERTOP
BY OTHERS
SEALING
COMPOUND
FAUCET
RELIANT
4205.241
6270.000
TOP MOUNT
E
*
41mm(1-5/8)
559mm
(22)
787mm
(31)
394mm
(15-1/2)
213mm
(8-3/8)
203mm
(8)
229mm
(9)
13mm
(1/2)
146mm
(5-3/4)
51mm (2
OPTIONAL
7173.804
(4 HOLES)
7173.805
(5 HOLES)
SPRAY
38mm
(1-1/2)
RAD TYP.
89mm
(3-1/2)
DIA.
206mm
(8-1/8)
38mm
(1-1/2) DIA.
HOLES TYP.
102mm
(4)
H
C
102mm
(4)
102mm
(4)
102mm
(4)
54mm
(2-1/8)
1-1/2 O.D. TAILPIECE
CUTOUT NOTE
254mm
*
(10)
E
COUPLING NUTS
ON FITTING
NOTES:
TEMPLATE PROVIDED WITH MOUNTING KIT 791123-100 FOR UNDER-
COUNTER, INSTALLATION AND COUNTERTOP CUTOUT.
FITTINGS AND UNDERCOUNTER MOUNTING KIT NOT INCLUDED AND
MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR WALL & COUNTERTOP SUP-
PORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.4
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided leaflet.
●
●
NOTES:
COUNTERTOP CUTOUT 756mm X 527mm WITH 25mm RADIUS (29-3/4
X 20-3/4 WITH 1” RADIUS)
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR WALL & COUNTERTOP
SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.4
These measurements are subject to change or cancellation. No responsi-
bility is assumed for use of superseded or voided leaflet.
DETAIL OF MOUNTING CLIP
(KIT No.791123-100)
BRASS
INSERT
13mm
(1/2)
MIN.
REFER TO INSTRUCTIONS
PROVIDED WITH KIT FOR
ADDITIONAL INFORMATION
CLIP
MACH.
SCREW
SINK
MOUNTING CLIP
(SEE DETAIL)
FINISHED WALL OR SPLASHBACK
FINISHED FLOOR
914mm
(36)
TO FINISHED
FLOOR (OPTIONAL)
●
*
3/8 O.D. BENDABLE TUBING
FAUCET
RELIANT
4205.241
6270.000
TOP MOUNT
E
*
41mm(1-5/8)
559mm
(22)
787mm
(31)
394mm
(15-1/2)
213mm
(8-3/8)
203mm
(8)
241mm
(9-1/2)
13mm
(1/2)
146mm
(5-3/4)
51mm (2
OPTIONAL
7173.804
(4 HOLES)
7173.805
(5 HOLES)
SPRAY
38mm
(1-1/2)
RAD TYP.
89mm
(3-1/2)
DIA.
206mm
(8-1/8)
38mm
(1-1/2) DIA.
HOLES TYP.
102mm
(4)
H
C
102mm
(4)
102mm
(4)
102mm
(4)
54mm
(2-1/8)
1-1/2 O.D. TAILPIECE
CUTOUT NOTE
254mm
*
(10)
E
COUPLING NUTS
ON FITTING
COUNTERTOP
BY OTHERS
SEALING
COMPOUND
