M968188 REV. 1.1
On model with separate spray, place the
SPRAY HOLDER
(1)
into the appropriate mounting
hole. Assemble the SPRAY HOLDER WING NUT
(2)
onto the shank of SPRAY HOLDER
(1)
from below
and tighten.
Do not use putty.
On model with spray through the ESCUTCHEON
(3)
,
place SPRAY HOLDER
(4)
into the hole of ESCUTCHEON
(3)
.
Assemble SPRAY HOLDER NUT
(5)
onto the shank of
SPRAY HOLDER
(4)
from below and tighten.
Do not use putty.
For installation less spray, cap off SPRAY HOSE
CONNECTION with PIPE CAP
(6)
.
3
INSTALL SPRAY HOLDER
1
3
5
6
4
2
4
CONNECT HOSE SPRAY
3
4
1
2
Feed SPRAY HOSE
(1)
through SPRAY HOLDER
(2)
and attach COUPLING NUT
(3)
of HOSE
(1)
to
HOSE ADAPTOR
(4)
on valve body. Tighten
COUPLING NUT
(3)
firmly.
SPRAY HOSE
CONNECTION
2
MAKE WATER SUPPLY CONNECTIONS
Turn off hot and cold water supplies before beginning.
Connect FLEXIBLE SUPPLIES
(1, 2)
directly
to wall supplies. Connection on fitting
supplies are 3/8" compression. Connect
left supply to Hot (Marked with a Red Line)
and right supply to Cold wall supply. Use
adjustable wrench to tighten connections.
Do not over tighten.
Faucet supplies are 21" long from faucet base.
Note: If additional supply length is
required, installer must purchase
additional parts separately.
Important: If SUPPLY HOSES (1, 2) are
too long, loop as illustrated to avoid kinking.
0
1
2
3
4
5
6
1
2
COLD
HOT
