H92
© 2008 AS America Inc.
EVOLUTION™ 5' x 32"
WHIRLPOOL AND BATHING POOL
HIGH GLOSS
Revised 3/06
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION.
SUPPORT OF BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.
■
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.
Model
2422VA
shown
60 x 32 x 21-1/2 In.
(1524 x 813 x 546mm)
74 Lbs. (34 Kg.)
690 Lbs. (313 Kg.)
74 Gal. (280 L)
33 Gal. (125 L)
41-1/4 x 22-1/4 In. (1048 x 565mm)
52-1/4 X 26 In. (1327 x 660mm)
18-1/2 In. (470mm)
52 Lbs./Sq.Ft. (253 Kgs./Sq.m)
GENERAL SPECIFICATIONS FOR 2422V WHIRLPOOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
1.4 HP, 9.7 AMPS, 120V.
PUMP
60"
(1524mm)
32"
(813mm)
11"
(279mm)
7-3/4"
(197mm)
13-3/4"
(349mm)
6"
(152mm)
3"
(76mm)
3-1/4"
(83mm)
32"
(813mm)
20"(C)
(502mm)
21-1/2"(H)
(546mm)
C/L
OF
OVERFLOW
20-1/8"(A)
(511mm)
CUT
OUT IN FLOOR
FOR
DRAIN
DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE
OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.
GENERAL SPECIFICATIONS FOR 2422V BATHING POOL
60 x 32 x 20-1/2 (1524 x 813 x 546mm)
54 Lbs. (27 Kg.)
675 Lbs. (306 Kg.)
74 Gal. (280 L.)
41-1/4 x 22-1/4 In. (1048 x 565mm)
52-1/4 x 26 In. (1327 x 660mm)
18-1/2 (470mm)
57 Lbs./Sq.Ft. (247 Kgs./Sq.m)
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
