7 9 0 0 8 8 - 1 0 0 R E V . H
Refer to American Standard roughing-in information for specific dimensions for each model.
Below are the dimensions of each sink. Make sure this area is available to mount the sink.
Unfold the template and refer to the instructions below.
Locate and mark center lines of sink on countertop. Provide proper clearance under the
countertop for the faucet supply lines and the structural parts of the cabinet. Do not use
permanent markers to indicate the center lines.
Cut the inner portion from the supplied template and discard.
Attach the outer portion of the template to the countertop using masking tape. Be sure
that the center lines on the template are aligned with those on the counter.
CAUTION
1. Minimum countertop thickness is 19mm (3/4) for wood and 12mm (1/2")
for marble and solid surface materials.
SINK CUTOUTS:
INSTALLATION B — FITTINGS MOUNTED DIRECTLY ON SINK
4
965mm
(38)
MODEL 7196
559mm
(22)
838mm
(33)
559mm
(22)
MODEL 7145, 7163 STANDARD,7179
559mm
(22)
MODEL 7172
457mm
(18)
MODEL 7185
I M P O R T A N T : D I M E N S I O N S O F F I X T U R E S A R E N O M I N A L A N D M A Y V A R Y W I T H I N T H E R A N G E
O F T O L E R A N C E S E S T A B L I S H E D B Y A . N . S . I . A N D C . S . A . S T A N D A R D S
.
457mm
(18)
SUPPORT
CLIPS
SUPPORT
CLIPS
SUPPORT CLIP LOCATIONS:
635mm
(25)
SUPPORT
CLIPS
SUPPORT
CLIPS
419mm
(16-1/2)
381mm
(15)
SUPPORT
CLIPS
SUPPORT
CLIPS
419mm
(16-1/2)
711mm
(28)
314mm
(12-3/8)
SUPPORT
CLIPS
MODEL 7182.801/803
MODEL 7182.000
MODEL 7162
1054mm
(41-1/2)
MODEL 7183
559mm
(22)
559mm
(22)
SUPPORT
CLIPS
SUPPORT
CLIPS
914mm
(36)
MODEL 7255
559mm
(22)
787mm
(31)
559mm
(22)
MODEL 7173
SUPPORT
CLIPS
