BERWICK
™
VESSEL LAVATORY FITTING
Installation
Instructions
M 9 6 8 6 4 2
Certified to comply with ANSI A112.18.1M
7430.15X
Turn off hot and cold water
supplies before beginning.
CAUTION
Adjustable Wrench
Channel Locks
Regular Screwdriver
Phillips Screwdriver
Plumbers' Putty or Caulking
1
INSTALL LAVATORY FAUCET
Seat SEAL
(1)
into under side of ESCUTCHEON RING
(2)
.
Feed FAUCET SUPPLIES
(3)
and MOUNTING SHANK
(4)
through
ESCUTCHEON RING
(2)
and hole in mounting surface.
Seat ESCUTCHEON RING
(2)
with collar facing up into groove
in faucet base.
From below, install SUPPORT PLATE
(7)
GASKET
(5)
and MOUNTING
NUT
(6)
onto SHANK
(4)
. Secure Faucet with MOUNTING NUT
(6)
.
Before final tightening, adjust Faucet so that it is centered. Tighten
MOUNTING NUT
(7)
to complete mounting.
Note: For thick deck installations, the SUPPORT PLATE (7) can be omitted.
Recommended Tools
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
CARE INSTRUCTIONS:
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.
1
2
4
MOUNTING SURFACE
3
6
5
7
COLLAR
GROOVE
(FAUCET BASE)
