M965686 Rev. 1.9 (1/19)
7a
1
REMOVE
2
3
•Turn ON water at main supply.
• With HANDLE
(1)
in “off” position, unthread SPRAY
(3)
from HOSE
(2)
.
• Operate handle back to front, in COLD and HOT positions, to flush water
lines thoroughly.
• Replace SPRAY
(3)
onto HOSE
(2)
.
• Please make sure that there is no cross threading.
- 4 -
7
6
FAUCET OPERATION – AUTOMATIC MODE, MANUAL MODE AND FEATURES
2
3
1
OPEN
CLOSED
Hot
Cold
Open
Closed
Automatic Mode
• Make sure the SLIDING DOOR
(1)
and HANDLE
(2)
are in the open position.
• To turn on the water, momentarily place your hand within 3
"
of the
SENSOR
(3)
.
• To turn off the water, momentarily place your hand again within 3
"
of the
SENSOR
(3)
.
Manual Mode
• Close the SLIDING DOOR
(1)
and use the HANDLE
(2)
to turn on and off
the water.
FEATURES
Safety Timer
• The faucet will automatically turn off the water after 5 minutes of
continuous use. Momentarily place you hand in front of the sensor to
turn on the water.
Low Battery Indication
• The sensor will start to blink constantly every second. This is the indication
that the batteries are low in power. Replace the batteries with Qty. (4) AA
Alkaline type batteries.
• Battery lifetime is approximately 1 year under normal use.
TEST INSTALLED FAUCET
CHECK CONNECTIONS FOR LEAKS
• Move HANDLE
(1)
into “off” position.
• Turn on water supplies and check connections for leaks.
• Operate HANDLE
(2)
up and down, left and right to flush
water lines thoroughly.
• Operate HAND SPRAY and check connections for leaks.
CHECK CONNECTIONS
FOR LEAKS
