012-5063-01B-EN
page 27
Advanced Bridge Settings
The
Advanced
screen contains three very powerful
functions. Each of these functions is very specific
and should be approached with a measure of
caution.
Unregister
Removes the bridge from American Standard
Home. All remote control features will be disabled.
Factory Reset
Resets all Z-Wave information and removes all
devices from the bridge. If this bridge is the primary
controller for your network, resetting it will result
in all the devices in your network being removed.
Following the reset, it will be necessary to remove
and then add all of the devices back to your
network.
Bridge Information
If this bridge is being used as a secondary or
inclusion controller in the network, please reset this
bridge only in the event that the primary controller
is missing or otherwise inoperable.
Learn
To add the bridge to an existing network, follow
your primary controller’s instructions to put the
primary controller into Add Mode. Then press the
Learn button on the bridge.
This function copies a new Z-Wave network to the
bridge from another controller. This function is not
allowed if your bridge is a primary controller with
included Z-Wave devices.
When adding the bridge to an S2 controller, the
S2 DSK will be displayed after pressing the Learn
button on the bridge.
Navigate to
Advanced
Screen by pressing:
Home Screen > Menu > Smart Home > Advanced
