con’t. FOR CADET TOILETS:
7 3 0 1 3 1 2 - 1 0 0
5-1
INSTALL TOILET ON FLANGE
a. Unplug floor waste opening and install toilet on closet
flange so bolts project through mounting holes.
b. Loosely install retainer washers and nuts. Side of
washers marked "THIS SIDE UP"
must
face up!
CLOSET
BOLT
NUT
TAPERED
WASHER
FLANGE
6-1
INSTALL TOILET
a.
Position toilet squarely to wall and, with a rocking motion,
press bowl down fully on wax ring and flange.
Alternately tighten nuts until toilet is firmly seated on floor.
CAUTION:
DO NOT OVERTIGHTEN NUTS
OR BASE MAY BE DAMAGED!
b.
Install caps on washers. (If necessary, cut bolt height to
size before installing caps.)
c.
Smooth off the bead of sealant around base. Remove
excess
sealant.
!
CLOSET
BOLT
NUT
WASHER
BOLT CAP
WAX
RING
SEALANT
4-1
Invert toilet on floor
(cushion to prevent
damage), and install
wax ring evenly
around waste flange
(horn), with tapered
end of ring facing
toilet. Apply a thin
bead of sealant
around base flange.
INSTALL
WAX SEAL
5-2
INSTALL TOILET ON FLANGE
a. Unplug floor waste opening and install toilet on closet
flange so bolts project through mounting holes.
b. Loosely install retainer washers and nuts. Side of
washers marked "THIS SIDE UP"
must
face up!
6-2
INSTALL TOILET
a. Position toilet squarely to wall and, with a rocking motion,
push bowl against ring and flange. Alternately tighten nuts
until toilet is firmly anchored.
CAUTION:
DO NOT OVERTIGHTEN NUTS
OR BASE MAY BE DAMAGED!
b. Insert the tapered washers (supplied in the kit) into the
lag bolts (not supplied). Insert bolts through mounting holes
and tighten into pre-drilled floor openings.
c. Install the four bolt caps on tapered washers. (If necessary,
cut wall bolt length to size before installing caps.)
d. Smooth off the bead of sealant around base.
Remove excess sealant.
!
4-2
Install seal evenly
around waste flange
(horn). Apply a thin
bead of sealant
around base flange.
* Note: Wax seal not
recommended for this
application.
INSTALL NEOPRENE OR GRAPHITE FELT SEAL*
con’t. FOR YORKVILLE TOILETS:
NEOPRENE
SEAL
SEALANT
BOLT
HEAD
WASHER
BOLT
CAP
BOLT
CAP
NUT & WASHER
LAG
BOLT
TAPERED
WASHERS
FLANGE
FLANGE
BOLTS
CLOSET FLANGE
- 2 -
