H121
© 2008 AS America Inc.
PRINCETON™ RECESS BATH W/ LUXURY
LEDGE AND INTEGRAL OVERFLOW
AMERICAST
®
BRAND ENGINEERED MATERIAL
PRINCETON™ RECESS BATH W/ LUXURY
LEDGE AND INTEGRAL OVERFLOW
for Above Floor Rough Installation
Americast
®
brand engineered material
❏
2396.202 ICH (Chrome Trim)
Left Hand Outlet for above floor installation
❏
2396.202 ICHTC Same as above with Tub Cover
❏
2397.202 ICH (Chrome Trim)
Right Hand Outlet for above floor installation
❏
2397.202 ICHTC Same as above with Tub Cover
❏
2396.202 IPB (Polished Brass Trim)
Left Hand Outlet
❏
2396.202 IPBTC Same as above with Tub Cover
❏
2397.202 IPB (Polished Brass Trim)
Right Hand Outlet
❏
2397.202 IPBTC Same as above with Tub Cover
❏
2396.202 IBS (Brushed Satin Trim)
Left Hand Outlet
❏
2396.202 IBSTC Same as above with Tub Cover
❏
2397.202 IBS (Brushed Satin Trim)
Right Hand Outlet
❏
2397.202 IBSTC Same as above with Tub Cover
• Lift and turn drain stopper assembly included
with bath
• Escutcheon included and installed on bath
• Acid resistant porcelain finish
• Recess bath with integral apron and
tiling flange
• Integral lumbar support
• Beveled headrest
• Extra wide ledge for placement of toiletries
• Full slip-resistant coverage
• End drain outlet
Nominal Dimensions:
1524 x 864 x 445mm
(60" x 34" x 17-1/2")
Bathing Well Dimensions:
1423 x 635 x 337mm
(56" x 25" x 13-1/4")
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.4 for Americast Plumbing Fixtures
• ASTM F-462 for Slip-resistant Bathing Facilities
• ANSI Z124.1 Ignition Test
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
Revised 2/08
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND
USEABLE BUILDING FACILITIES-CHECK LOCAL CODES.
INSTALL WITH SEAT AT HEAD END.
SEE REVERSE FOR PRODUCT DIMENSIONS
AND SPECIFICATIONS
Photograph details integral overflow and drain
assembly. Drain assembly included with bath.
BARRIER FREE
Americast
®
brand engineered material is a composition of porcelain bonded
to enameling grade metal, bonded to a patented structural composite.
To Be Specified:
❏
Color:
❏
Bath Filler: (specify finish)
❏
Bath Drain: 1583.470 (specify finish)
To Be Specified - Optional:
❏
Pressure Test Kit
†
: 791363-0070A
*See faucet section for additional models available
†
Pressure Test Kit is necessary to seal overflow and perform
system pressure test.
