4
754474-100 Rev. A
Electrical
Consult a qualified electrician for the following hook-up. Failure to do this will affect your warranty.
A separate 115 VAC 15 amp 60Hz service is required.
Warning – When using electrical products, basic precaution should always be followed, including the following:
1.
DANGER:
risk of electrical shock. Connect only to a circuit protected by a 15 AMP GROUND-FAULT-CIRCUIT INTERRUPTER (GFI)
and appropriate grounded outlet.
2. GROUNDING IS REQUIRED. THE UNIT SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIAN AND GROUNDED.
A pressure wire connector is provided to permit connection of a No. 8 AWG solid copper bonding conductor between the control unit and
all other electrical equipment and exposed metal in the vicinity, as needed to comply with local requirements.
NOTE:
BUILDING MATERIALS AND WIRING SHOULD BE
ROUTED AWAY FROM THE AIR PUMP BODY.
•
Press this key to start or stop the blower.
•
Press and hold this key to increase or decrease the blower speed until desired level
•
1st - Press, speed will vary gradually from maximum to minimum and back to maximum.
•
2nd - Press, system turns off and on, alternately.
• 3rd - Press, returns to maximum speed.
ACTION
The system will stop automatically after 20 minutes.
Advanced function:
An automatic drying cycle will start 20 minutes otter the blower is turned off.
on
off
Operating Instuctions
