5
SAVE FOR FUTURE USE
7 3 0 1 2 4 4 - 1 0 0
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
P r o d u c t n a m e s l i s t e d h e r e i n a r e t r a d e m a r k s o f A S A m e r i c a , I n c .
© A S A m e r i c a , I n c . 2 0 0 8
NOTE:
Pictures may not exactly define contour of china and components.
ABOVE COUNTER SINK
FOR USE WITH: 0621.001 STUDIO
INSTALLATION INSTRUCTIONS
CARE AND MAINTENANCE
Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product
is installed properly, please read these instructions carefully before you begin. (Certain installations may require
professional help.) Also be sure your installation conforms to local codes.
!
OBSERVE LOCAL PLUMBING AND BUILDING CODES
RECOMMENDED TOOLS AND MATERIALS
Putty Knife
Regular Screwdriver
Adjustable Wrench
Drill
Tape Measure
Hacksaw
Phillips Screwdriver
Pipe Wrench
Basin Wrench
Channel Lock Pliers
Tubing Cutter
Jig Saw
Silicone Adhesive
Plumber’s Putty or Caulking
RECOMMENDED FAUCET
*
:
2064.101 ONE lavatory faucet
*
Log on to www.americanstandard-us.com for additional faucet selections.
Countertop Installation:
Using the template provided, locate the position of
the sink on the countertop. Provide proper clearance
under the countertop for the faucet supply lines, drain
assembly and the structural parts of the cabinet.
NOTE:
If replacing an existing sink be certain to shut
off water supply before removing old sink.
Drill a clearance hole inside the perimeter line
of the template for countertop installation.
Cut opening around the perimeter of the template.
Mount the faucet and drain assembly (not included)
on the sink following the manufacturer’s instructions.
Be certain to apply a bead of sealing putty on the
underside of the drain (Part “A”) in order to ensure a
watertight seal between the sink and drain. Remove
excess putty after installing drain on sink.
4a
4b
Countertop Installation:
• Place the sink temporarily into the template
• Check for alignment and clearance
• Mark the sink and countertop in several places
as a guide for the installation location.
Vanity Installation:
• Place the sink temporarily on the vanity to
check for alignment and clearance
• The sink should be centered left to right on the
vanity with the front edge of the sink even with
the front of the vanity
After checking fit and alignment, turn sink upside down
and apply a generous portion of silicone adhesive
around the under side of the rim near the edge. Place
sink in position. Wipe off excess adhesive.
Mounting on Studio 22" Vanity:
Assemble vanity as per instructions.
1a
1b
2
3
Perimeter
of
template
Perimeter of
template
A
