Use only as intended. Should only be used by qualified individuals.
CAUTION:
Risk of electrical shock! Do not use near water or if you are wet.
Intended for indoor use only. Use in dry, ventilated area free of excessive
dust, humidity, flammable materials, corrosive fumes and conductive contaminants.
Do not connect to directly to 110v~220V power source. Only use power supplies
supplied with OAS series LED INDICATOR SIGNS.
WARNING:
Do not pull cord protruding from back of panel.
Do not use if the electrical cords are worn or damaged.
KEEP THIS PRODUCT OUT OF THE REACH OF CHILDREN
The information contained in this document is subject to change without notice.
American Recorder Technologies, Inc. makes no warranty of any kind with regard
to this material, including, but not limited to, the implied warranties of merchant-
ability and fitness for a particular purpose. Not liable of errors contained herein or
for incidental or consequential damages in connection with the furnishing,
performance, or use of this material.
IMPORTANT SAFETY PRECAUTIONS
!
CONNECTIONS:
POWER
SUPPLY
POWER
ON OFF FLASH
MOMENTARY
+ - + -
INPUT OUTPUT
SIGN
BACK
+9-24DC
GND
U
U
1. Strip 1/8” of insulation off end of wire and
insert into appropriate end of green
terminal block (note + & - polarity).
2. Tighten screw at top of terminal block
securing each wire and give slight tug
to confirm.
Tools required:
- Wire Strippers
- Small tip flat-blade
screwdriver
POWER
+ - + -
INPUT OUTPUT
ON
- Powers on sign
OFF
- Powers off sign
FLASH
- Automatically powers on/off sign
(apporx @1.5 sec interval)
MOMENTARY
- Powers signs when button
is engaged, off when released
BUTTON CONTROLS:
Use only as intended. Should only be used by qualified individuals.
CAUTION:
Risk of electrical shock! Do not use near water or if you are wet.
Intended for indoor use only. Use in dry, ventilated area free of excessive
dust, humidity, flammable materials, corrosive fumes and conductive contaminants.
Do not connect to directly to 110v~220V power source. Only use power supplies
supplied with OAS series LED INDICATOR SIGNS.
WARNING:
Do not pull cord protruding from back of panel.
Do not use if the electrical cords are worn or damaged.
KEEP THIS PRODUCT OUT OF THE REACH OF CHILDREN
The information contained in this document is subject to change without notice.
American Recorder Technologies, Inc. makes no warranty of any kind with regard
to this material, including, but not limited to, the implied warranties of merchant-
ability and fitness for a particular purpose. Not liable of errors contained herein or
for incidental or consequential damages in connection with the furnishing,
performance, or use of this material.
IMPORTANT SAFETY PRECAUTIONS
!
CONNECTIONS:
POWER
SUPPLY
POWER
ON OFF FLASH
MOMENTARY
+ - + -
INPUT OUTPUT
SIGN
BACK
+9-24DC
GND
U
U
1. Strip 1/8” of insulation off end of wire and
insert into appropriate end of green
terminal block (note + & - polarity).
2. Tighten screw at top of terminal block
securing each wire and give slight tug
to confirm.
Tools required:
- Wire Strippers
- Small tip flat-blade
screwdriver
POWER
+ - + -
INPUT OUTPUT
ON
- Powers on sign
OFF
- Powers off sign
FLASH
- Automatically powers on/off sign
(apporx @1.5 sec interval)
MOMENTARY
- Powers signs when button
is engaged, off when released
BUTTON CONTROLS:
