5
STEP 4a -Install WEIGHTED BASE to pole
with (3) M5x14 bolts. Use Allen Wrench
Key to tighten.
Carefully slide Integrated Microphone Extension Arm down pole until almost at the base. Leave 2-3 inches for clearance when adjusting extension arm. Secure pole clamp
with 6mm Allen Wrench Key. Once the arm is in position, attach the MICROPHONE CRADLE and secure by fastening with THUMB BOLT (hand tighten only). The pivoting
plate should move with some resistance and then stay in place, adjust the tension screw if necessary.
STEP 4b - OPTIONAL FOR PERMANENT MOUNT - once a
location is chosen, measure and drill 3/8" hole in tabletop.
Secure with THREADED KNOB (STEP 3b) and BOTTOM PLATE
STEP 4
For Weighted Base
Integrated Microphone Extension Arm
THUMB BOLT
MICROPHONE EXTENSION ARM
POLE
TENSION
ADJUSTMENT
SCREW
MICROPHONE
CRADLE
PIVOTING
PLATE
MOUNT
DESK/TABLETOP
WEIGHTED BASE
WEIGHTED BASE
THREADED KNOB
BOTTOM PLATE
POLE
POLE
STEP 5
0
5
25
75
95
100
ALLCAST MULTI STAND OWNERS MANUAL ver2.0
Saturday, February 20, 2021 3:05:50 PM
