Popcorn Machine
Before you Plug In the Machine:
Make sure the wall outlet can take the three-pronged grounded
plug on the power supply cord. Make sure nothing else is
plugged into the outlet.
An extension cord should NOT be used. Fires and malfunctions
can start from light duty extension cord that overheats due to
overload.
The extension must have a grounded wire, properly connected,
or you can lose the safety features built into the machine.
Never leave the “kettle heat” on when you are not popping.
Do Not:
Use a two prong plug adapter
Immerse kettle in water
Cover the air vents on the popper. These are located at the top
of the machine. It can cause serious damage to the machine.
Forget to return popcorn scoop!
Controls:
Light and Warmer Switch
—turns on the heat lamp and strip
heater under corn pan.
Kettle Motor Switch
—turns on the motor which drives kettle
agitator shaft.
Kettle Heat Switch
—turns on the heat elements inside the
kettle.
