background image

Note:

 when establishing infrared connection between the receiver and 

the transmitter, the distance between them should not exceed O.5m. 
When more than one system are used, only IR window of one 
transmitter should be pointed to the receiver for each infrared 
connection.

ECMR Receiver Setup:

Channel Selection

Press channel Selector button to select desired Channel. When 
switching Channels, wait for the Channel number display to stop
blinking before using the ASC function. For best results when 
operating multiple systems, set every channel to achieve the 
maximum distance between channels.

Receiver Volume Control:

Turn Left for Output Level decrease, turn Right for Output Level 
increase.

Mute Level Threshold Adjustment:

The Mute Level is factory set and normally needs no adjustment. 
However, you may turn clockwise if interference is present.

Automatic Transmitter Setup (ASC):

Remove the access cover on the Handheld Transmitter. Point the 
IR Window of the Handheld towards the IR Window on the 
Receiver and press the ASC button.

Point the MBP52 Bodypack IR Window towards the Receiver IR 
Window, then press the ASC buttons on both the Transmitter and 
Receiver.

The Receiver transmits sync frequencies for 25 seconds each 
time you press the "ASC" button.

Whenever the ASC button on the MBP52 is pressed, the 
synchronizing signal will be transmitted continually for 25 
seconds.

Reviews: