Merlin DP PCI Motherboard User’s Guide
Step 5 Attach Cables,
Continued
J29 Green PC Power
J29 is a two – pin berg that connects to a Green PC power supply. When the
computer enters a power conserving state, a signal is sent from this berg to the
power supply to permit the power supply to switch to a low power, high –
efficiency mode. The + on Pin 2 identifies the positive connector.
J32 Reset Switch Connector
J32 is a two – pin single – inline berg that is attached via a cable to an
externally – mounted reset switch. When the reset switch is pressed, the
system performs a hard reset. Pin 1 is ground and Pin 2 is Hard Reset.
J35 Speaker Connector
J35 is a four – pin single – inline berg that is optionally attached via a cable to a
standard system speaker. AMIBIOS signals hardware problems through the
speaker. Pin 1 on the motherboard is identified by the arrow on the white box
around the berg. The Merlin DP PCI motherboard also has a built – in speaker
mounted on the motherboard.
Pin
Description
1
Data Out
2
Key
3
N/C
4
VCC
Cont’d