American Megatrends 802, User Manual

Page: 7 / 62

INTRODUCTION
MI802 User’s Manual 3
MI802 Specifications
Form Factor Mini-ITX
CPU Type Intel
®
Atom
TM
D2550/N2600 processor (32nm Technology)
22mm x 22mm, Micro-FCBGA559 [TDP=10W/3/5W]
CPU Speed 1.86GHz / 1MB L2 cache (MI802)
1.6GHz / 1MB L2 cache (MI802N)
BIOS AMI BIOS, support ACPI Function
Chipset Intel
®
CG82NM10 PCH: 17mm x 17mm, 360-pin BGA (2.1W)
Memory
DDR3-1066MHz
SO-DIMM x 2 (w/o ECC), Max.
4GB , Single channel (MI802)
DDR3-800MHz
SO-DIMM x 1 (w/o ECC), Max.
2GB , Single channel (MI802N)
VGA Intel® Integrated Graphics Controller (GMA3650)
Supports DirectX 9 Graphic, OpenGL 3.0
Interface: CRT and DVI-D (thru level shifter ASM1442)
LVDS Chrontel CH7511B for 24-bit dual channel LVDS interface
LAN
Realtek 8111E-VL GbE x 2
USB NM10 built-in USB 2.0 host controller, support 8 ports
-
4 ports in the rear panel
- 3 ports for onboard pin header (3
rd
port signal shared with Mini
PCIe)
- 2 ports via Mini PCIe slot
Serial ATA Ports
NM10 built-in SATA controller, supports 2 ports
Audio NM10 built-in HD audio controller w/ Realtek ALC269QHD Codec
LPC I/O Fintek F81866AD-I:
- COM1 (RS-232/422/485), COM2 (RS-232), COM3 (RS-232),
COM4 (RS-232), COM5 (RS-232), COM6 (RS-232)
- Hardware monitor (2 thermal inputs, 4 voltage monitor inputs,
VID0~4 & 2 x Fan Header)
- COM1/2 with pin-9 with power for 2 ports (500 mA for each port)
Digital IO 4 in & 4 out
Keyboard/Mouse
Connector
Yes
Expansion Slots Slim PCI slot x 1
Mini PCI-e(x1) x
2, Mounting holes for full-sized (x2) [Reserved
mounting holes for Half-sized also x1]
Edge Connector
PS/2 KB+MS stack connector x 1
DB15 + DVI-D stack connector x 1 for CRT + DVI
Dual DB9 stack connector x1 for COM#1 + COM#2
Dual USB + RJ45 x2 for USB + LAN
HD Audio Jack 3x1 connector x 1 (Line-out, Line-in, MIC)
Onboard Header/
Connector 2x4 pin header x 1 for 2 USB ports
1x5 pin header x 1 for USB 4 [Shared with Mini PCIe USB signal]
2x6 pin header x 1 for front audio
DF11 type 10 pin box header x 4 for COM # 3~6
2x5 pin header x 1 for Digital I/O
DF13 box header x 2 for LVDS
4 pin box header x1 for LCD backlight control
SATA connector x 2
4-pin HDD power connector x 2 for SATA device
4-pin ATX power connector for DC-in power
4-pin header for speaker out (from ALC269 internal amplifier)
Watchdog Timer
Yes (256 segments, 0, 1, 2…255 sec/min)
Power Connector +12~24V DC-in (ATX 4-pins)
Others 1. iSMART function [Auto-scheduler & Power fail resume ]
2. EuP/ErP thru Super I/O [WOL from 1
ST
GbE]
Board Size 170mm x 170mm