Pacific Accessory Corporation
®
| Santa Ana, California 92705 | Ph. 866-931-8021 | [email protected]
©2014 Pacific Accessory Corporation
www.pac-audio.com
Pacific Accessory Corporation
RP4-CH21
Radio Replacement & Steering Wheel Control Interface
for Dodge/Jeep/Ram Vehicles
Rev. 043014
Page 4
Optional Steering Wheel Control Programming (cont)
Radio
Alpine
JVC
Kenwood
Clarion
Other*
Pioneer
Sony
Fusion
1
2
Volume -
Volume -
Volume -
Volume -
Volume -
Volume -
Volume -
Volume -
3
Mute
Mute
Mute
Mute
Mute
Mute
Mute
Mute
4
Source
Source
Source
Source
5
Preset -
Track +
Play
Preset -
Preset -
Preset -
Track +
6
Source
Track -
Track +
Search -
Source
Source
Source
Track -
7
Track +
Band/Disc +
Track -
Band
Track +
Track +
Track +
Audio
8
Track -
Preset/Disc -
Disc/FM +
Send/End
Track -
Track -
Track -
Power
9
Power
Select
Disc/AM -
Send
Band
Band
Band
10
Enter/Play
Attenuation
Answer
End
Phone Menu
Reject Call/Source
(Bluetooth equipped
radios only)
11
Band/Program Phone Receive
Voice Dial
Answer Call
Answer/End Call
12
Receive
Phone Reject
On Hook
End Call
13
End
Voice Dial
Off Hook
Voice Activation
14
Power
Mute (Multimedia
units only)
*Other = Advent, Boyo, Dual, Lightning Audio, Rockford Fosgate, & Visteon
Optional Programming Order
Programming
1. Turn the key to the ignition position.
2. Press and release programming button on the side of the interface.
3. Within 7 seconds, press the button that is to be learned on the steering wheel. The LED will turn off when the button is pressed.
At this point you have two options:
A. For short press functionality:
Release the button within 1.5 seconds. The LED will turn back on.
B. For long press functionality:
Hold the button until the LED starts blinking. Release the button and the LED will
go back to solid.
4. If you need to program more buttons, repeat step 3 for each additional audio function on the steering wheel.
5.
If you come across a function in the chart that your steering wheel does not have, or you do not want to program, press and
release the program button on the side of the interface to skip that function.
6. Once programming is completed, wait seven seconds. The LED will flash three times indicating end of programming.
7. Test the interface for proper functionality. Whenever a SWC is pressed the LED on the interface should blink. If any function
does not work, repeat the programming steps
1
2 3 4 5
6 7
8 9
0
Alpine
JVC
Kenwood
Clarion
Pioneer/Other
Sony
Fusion
1
2
3
4
7
8
9
Other =
Advent, BOYO, Dual, Lightning Audio, Rockford Fosgate, Visteon
SET RADIO SELECT SWITCH
RP4-CH21 SWC Notes
1. In vehicles that do not have SWC for the radio but do have
SWC for the menu you can program the up/down/left/right
arrows to whatever you want. We recommend that you
have the DIC in the speedometer screen when using the
SWC for the radio (Fig.1)
2. The Mute, Answer and End buttons in the Ram Promaster
can not be programmed for long press functionality.
Fig. 1
Summary of Contents for CDK656
Page 1: ......
