8
RESETTING THE UNIT
If the system does not respond or exhibits erratic or intermittent operation, you may have
experienced an electrostatic discharge (ESD) or a power surge that triggered the internal
microcontroller to shut down automatically. If this occurs, simply disconnect the AC Adapter.
Wait for at least 3 minutes and then setup the unit again as if you were using it for the very
first time.
CARE AND MAINTENANCE
1. Clean your unit with a damp (never wet) cloth. Solvent or detergent should never be
used.
2. Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
3. Keep your unit away from heating appliances and sources of electrical noise such as
fluorescent lamps or motors.
TROUBLESHOOTING GUIDE
PROBLEM
POSSIBLE CAUSE
SOLUTION
No power when
plugged in
AC adapter is not plugged into the
AC outlet.
Insert the AC adapter into the AC outlet.
The AC outlet may not have
power.
Check the outlet with a working lamp or other
electrical appliance.
No sound
MASTER VOLUME control is set
to minimum.
Turn up the master volume.
Unit is not linked with the
Bluetooth enabled device.
Go through “Pairing a Bluetooth device” process
to link the unit.
Unit placement out of range
Relocate the unit within Bluetooth operating
range (30 feet)
Cannot sing
through the Mic.
Improper mic volume control.
Adjust MIC and MASTER volume level controls
to appropriate levels.
n
o
d
e
t
a
c
o
l
h
c
ti
w
s
F
F
O
/
N
O
e
h
t
h
ti
w
c
i
m
n
o
n
r
u
T
.f
f
o
s
i
c
i
M
the microphone.
Mic is not properly plugged in.
Insert the mic plug into either MIC 1 or MIC 2
jack of the unit properly.
