32930-7-1015
Page 48
MAINTENANCE AND SERVICE
Figure 85
Figure 86
Figure 87
Wiring
If any of the original wire supplied with this unit must be replaced, it
must be replace with 18 GA. 150°C wire or its equivalent.
Replacing the Light Bulbs (Bulb Type: 20V 35W 6.35mm Base)
1. Remove the offset frame and the glass frame.
2. Lift the light access panel up and out of the firebox.
See Figure
88.
3. Remove the bulb(s) to be replaced.
4. Wear gloves or use a clean cloth while handling bulbs or else
bulb lifespan may be decreased.
Figure 88
